Best USB-C Hubs Australia: Anker vs Belkin Buying Guide

The best USB-C hub for an Australian single-monitor laptop setup is the one your laptop can actually drive. Shortlist the Anker 555 if you need Ethernet, card readers and up to 10Gbps USB data; the Belkin AVC023 if card readers and up to 4K at 60Hz matter but Ethernet does not; or the Anker 332 if its lower 4K at 30Hz ceiling meets your needs. Confirm the host port and complete delivered cost before choosing.

Affiliate disclosure: As an Amazon Associate, WhatsCheap earns from qualifying purchases. Amazon cards below are model searches, not verified offers.

This is a manufacturer-specification buying guide, not a hands-on test or a measured performance ranking. We have not verified current Australian seller prices or stock for these exact models. The Amazon cards open searches, not guaranteed offers. The cover is an AI-generated illustration of generic equipment, not a photograph of the compared models.

Quick decision: which USB-C hub fits your desk?

• Anker 332 A8355: shortlist for one HDMI display and basic USB expansion when 4K at 30Hz is sufficient. Skip it if 4K at 60Hz is a requirement.

• Anker 555 A8383: shortlist when you want one HDMI display, wired Ethernet, card readers and higher advertised USB data speed in the same hub. Do not pay extra solely for unused ports.

• Belkin AVC023: shortlist for one HDMI display plus USB and memory cards, without the Ethernet connection offered by the 555. Compare the exact regional model and seller terms.

• Two external screens or a USB-C-only monitor: do not assume any of these HDMI-focused hubs will solve that setup. Check your laptop and display requirements before buying a different dock.

In this guide: model comparison; host compatibility; charging; Australian checkout worksheet; frequently asked questions.

Best USB-C hubs Australia: compare the documented options

These are maximum advertised capabilities, not speeds we measured. A specification on the hub does not prove that your particular laptop, monitor and cable combination will achieve it. Product numbers matter more than a listing that merely says “5-in-1” or “7-port”.

Anker 332 A8355: fewer extras, lower display ceiling

Anker lists one HDMI connection supporting up to 3840 × 2160 at 30Hz, two USB-A data ports and one USB-C data port rated up to 5Gbps. The fifth socket is the USB-C power input. Its specification separates 100W PD input from up to 85W output for the laptop. It does not list Ethernet or memory-card readers.

Choose it when those connections cover your actual equipment and the delivered price justifies its limitations. For a 4K screen you want to run at 60Hz, remove it from the shortlist rather than expecting a cable upgrade to change the stated display limit. The USB-C data connection is not an extra monitor output.

Source: Anker 332 A8355 specifications

Anker 555 A8383: Ethernet and faster-rated USB data

Anker advertises one HDMI output up to 4K at 60Hz, USB-A and USB-C data connections up to 10Gbps, Ethernet, SD and microSD readers. Its published charging limit is 100W input with up to 85W for the laptop, and Anker says the charger is not included. Its USB data ports are not specified as charging ports.

This is the more relevant shortlist option if you need a wired network and routinely connect removable storage. Check the manufacturer’s host compatibility conditions for the advertised display mode. The higher data rating is a capability ceiling, not a promise that copying a file will be twice as fast as on the 332.

Source: Anker 555 A8383 specifications and notes

Belkin AVC023: card access without Ethernet

Belkin’s AVC023 support page lists two USB-A data ports, one USB-C data port, one USB-C PD input, HDMI, SD and microSD. The data connections are rated up to 5Gbps and HDMI up to 4K at 60Hz. The compatibility section specifies USB-C laptops with DisplayPort Alt Mode; actual display resolution depends on the laptop’s graphics and settings.

Consider it if card readers and a single HDMI display cover the job. There is no Ethernet socket in the published seven-port list, so it is not a direct substitute for the 555 if a network cable is essential. Check the exact seller SKU rather than assuming every Belkin multimedia hub has this specification.

Source: Belkin AVC023 support and compatibility

Compatibility checklist: start with the laptop, not the hub

Write down your full laptop model and the particular USB-C port you intend to use. Look up that port in the laptop manufacturer’s documentation. For a native HDMI hub, confirm video support, usually described as DisplayPort Alt Mode; for one-cable laptop charging, separately confirm USB-C Power Delivery input support. A matching plug shape is not the whole compatibility check.

• Display: record the monitor model, input socket, desired resolution and refresh rate. Check that the complete host–hub–cable–display combination supports that mode.

• Ports: count the devices you use together. A keyboard, mouse receiver and storage drive may already require more USB connections than you expected.

• USB-C monitor: check its input requirements. Do not treat a hub’s USB-C data socket or PD input as a video output.

• Multiple displays: verify the laptop’s supported external-display count, operating system and dock compatibility. These three single-HDMI examples are not a two-screen buying recommendation.

• Physical fit: check tether length, socket spacing and where the hub will sit. Avoid buying a layout that leaves connectors pressed against a stand or requires the hub to hang from a port.

Charging: input watts are not laptop output watts

The 332 and 555 distinguish a 100W input from an 85W laptop output ceiling. Belkin describes up to 100W PD pass-through minus about 15W for operating the hub. These are maximum specifications, not a guarantee of the power your laptop will negotiate with an existing charger.

Check the hub instructions, charger’s supported USB-C PD output, cable power rating and your laptop’s charging requirements together. With a multiport charger, inspect the output allocation when other devices are connected. Do not assume the wattage printed on the charger is always available on the port feeding the hub.

If your laptop needs more power than the hub can deliver, consider retaining its separate charging connection or choosing a dock explicitly designed for the requirement. Do not buy this shortlist on the assumption that any “100W” accessory will charge every laptop at its original rate.

Australian checkout worksheet: compare the whole kit

Use this worksheet for each seller listing. Leave an unknown field blank and resolve it before ordering; an attractive headline discount does not compensate for the wrong output mode.

• Exact hub model and regional SKU: ____. Laptop model and verified host port: ____.

• Monitor model, input and required resolution/refresh rate: ____. Evidence that the combination supports it: ____.

• Hub price in AUD: ____. Delivery: ____. Any required charger, cable or adaptor: ____.

• Complete checkout total: ____. Seller identity, dispatch location and return process: ____.

• Included accessories and applicable manufacturer support: ____. Written compatibility answer from the seller, if needed: ____.

Compare the same model at Amazon Australia and other retailers that actually list it. Do not assume every model is sold by JB Hi-Fi or Officeworks, or that a global manufacturer price is an Australian offer. Where WhatsCheap has a relevant listing, compare its retailer information and available price history with the seller checkout rather than treating an old price as live.

Search the WhatsCheap product catalogue

Compare wireless mouse buying criteria for your desk

Frequently asked questions

Will any USB-C hub work with my laptop? No. Verify the laptop’s exact port capabilities and the hub’s supported host requirements. Video output and laptop charging are separate checks, not automatic consequences of a USB-C socket. If the manufacturer documentation is unclear, get a model-specific compatibility answer before ordering.

Is a 4K hub automatically suitable for 4K at 60Hz? No. The Anker 332 is specified up to 4K at 30Hz. The 555 and AVC023 advertise up to 4K at 60Hz, subject to the host and display chain. Check the refresh rate explicitly instead of relying on a listing that only says “4K”.

Should I pay more for 10Gbps? Consider it if your host port, storage and workload can use the higher rating. It is not a measured transfer result or the same thing as display refresh rate. If your devices do not need that capacity, prioritise compatibility, usable ports and complete purchase cost instead.

Are the Amazon cards verified offers? No. They are attributed Amazon Australia searches intended to help you find exact model listings. Check the result’s model, seller, price, delivery, package contents and returns. Search results can include alternatives or accessories; appearing in the results is not our confirmation that an item matches.

The practical next step

For the best USB-C hubs in Australia, choose by the job: the 332 for a simpler HDMI-and-USB setup within its display limit; the 555 for Ethernet and higher-rated USB data; or the AVC023 for HDMI and card access without Ethernet. Resolve host compatibility first, fill out the checkout worksheet, then compare the exact model listings. No single winner is proven by specifications alone.

As an Amazon Associate, WhatsCheap earns from qualifying purchases. Source: WhatsCheap Australia; manufacturer specifications linked above. Prices, seller stock and measured performance are not verified in this guide.